5．Configuration Mode; Web Settings; Configuration Tool Software Settings; At Command Configuration - Ebyte EBT3001 User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

5．Configuration Mode

You can customize the relevant parameters through the Web setting method. Open the browser, enter the device IP in the

address bar (default: 192.168.3.7), enter the page, you can query and set parameters, and finally click the "Submit" menu

to wait for the page to return to the successful prompt, and it will take effect.

Note: Do not enter the web page configuration during normal use, which may cause data loss. If you enter the web page

configuration, you need to restart to enter the communication mode.

Web page configuration initialization password: 123456, can be customized configuration, only supports 6-bit uppercase

and lowercase letters and numerical configuration.

The webpage configuration requires browsers with newer kernels to work properly, such as Microsoft Edge

(96.0.1054.62), Google chrome (96.0.4664.110), Firefox (95.0.2), etc.

[Note] IE, 360 compatibility mode, QQ browser compatibility mode and other browsers using IE core are not supported

to use web page configuration.

Open the configuration tool software, search for devices, double-click the identified device, and the parameter query

configuration interface will pop up. You can customize and modify relevant parameters according to your needs, then

save the configuration, restart the device, and complete the parameter modification.

【Note】:

Do not use multiple host computers in the same local area network environment. Multi-network card industrial

computers need to temporarily disable and do not use network cards, otherwise the host computer will not be able to

search for devices normally (the same device is displayed multiple times, no device can be found, etc.)

The host computer shields the wireless network card, so the network cable must be connected to use the host computer,

and the wireless network card can be configured through the web page.

The query and modification of relevant parameters of the device can be completed through AT command configuration.

For specific AT commands, please refer to "NA11x&NT&NS-AT Command Set".

EBT3001 User Manual

Table of Contents