Simple Protocol Conversion Mode; Multi-Host Mode - Ebyte EBT3001 User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

EBT3001 User Manual

Enable(Check): Convert Modbus RTU protocol to Modbus TCP protocol.

Disabled: Do not perform protocol conversion but verify Modbus data, discard non-Modbus data (RTU/TCP) and not

transmit.

4.4.2 Simple Protocol Conversion Mode

Convert Modbus RTU data to Modbus TCP data, or convert Modbus TCP data to Modbus RTU data, to realize the

mutual conversion of Ethernet Modbus data and serial port Modbus data.

Simple protocol conversion can work in any mode (TCP client, TCP server, UDP client, UDP server etc.), no matter what

mode it is working in, there can only be one Modbus master station.

Simple protocol conversion configuration (TCP server mode as an example, the upper computer on the left, web page on

the right) :

There is only one Modbus master station for relatively simple protocol conversion, while the multi-master mode can

handle up to 6 Modbus TCP masters. One request is processed at a time, while the multi-host mode will be sequenced

according to the TCP request, and other links will wait) to solve the bus conflict problem (currently only 6 host

connections are supported), only supports working in TCP server mode, slave machine Only in the serial port, otherwise

it will not work properly.

It is recommended to configure "Simple Protocol Conversion" when no multi-channel host is used.

Multi-host mode configuration (upper computer, web page below) :

Table of Contents