Ebyte EBT3001 User Manual page 7

Chengdu Ebyte Electronic Technology Co.,Ltd.
31
32
33
35
36
43
44
4~6, 9~10,
15~16, 19, 22~23
RESERVED
26,29~30,34,
37~42, 48~48
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
X32MO I/A
X32MI A
WON power supply
VDC power supply
IO_RST I/O/A
TXD_LED I/O/A
RXD_LED I/O/A
--
The inverting output terminal of the frequency
oscillator HSE is connected to one end of a 32MHz
crystal;
The input end of the high frequency oscillator HSE ,
the other end of the external 32MHz crystal;
The power node of the internal analog circuit needs to
be close to the pin and connect an external 2.2uF
decoupling capacitor;
The power input of the internal analog circuit LDO
regulator needs an external decoupling capacitor. It is
recommended to be no less than 0.1uF , and it is
recommended to connect VDCID through magnetic
beads or directly ;
To restore the factory side, an external reset button is
required, and the low level lasts about 5s to be
effective;
Serial port sending indication terminal, the default
output is high level, when there is data output, it
outputs low level, and when there is continuous data,
it outputs a square wave signal with a period of 80ms
and a low level of 20ms ;
Serial port receiving indication terminal, the default
output is high level, when there is data input, it
outputs low level, and when there is continuous data,
it outputs a square wave signal with a period of 80ms
and a low level of 20ms ;
Keep it floating;
EBT3001 User Manual
6