Screen Capture Setting (Save File); Screen Capture Setting (Erase File) - JRC JMR-611 Instruction Manual

3.7.2 Screen Capture Setting (Save File)

Only when "4.Capture Mode" setting is "Auto-2", capture data is saved in internal memory.
But these data are deleted when the system is turned off. Therefore, the data must be moved
from internal memory to a flash memory card before turning off in "Auto-2" mode.
(In the case of "Manual" or "Auto-1", capture data is saved to a flash memory card
automatically.)
Procedures 1 Insert a flash memory card into the card slot.
2 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 1.Screen Capture Setting and press [ENTER] key.
3 Select 2.Save File and press [ENTER] key.
The folder is created automatically, and the data is saved in the folder.
Folder is created in each one hour.
Folder name : YYYYMMDD_hhmm
Data name : YYYYMMDD_hhmmss

3.7.3 Screen Capture Setting (Erase File)

Erasing of a capture data in a flash memory card is possible.
Procedures 1 Insert a flash memory card into the card slot.
2 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 1.Screen Capture Setting and press [ENTER] key.
3 Select 3.Erase File and press [ENTER] key.
4 Select folder name in which data to be erased is saved and press
[ENTER] key.
5 Select file name to be erased and press [ENTER] key.
Confirmation Window will appear.
6 Select 1.Yes and press [ENTER] key.
The capture data is erased.
YYYY : "year" when folder or data is created.
MM : "month" when folder or data created.
DD : "day" when folder or data is created.
hh : "hour" when folder or data is created.
mm : "minute" when folder or data is created.
ss : "second" when data is created.
3-47
3.7 SCREEN CAPTURE


3