JRC JMR-611 Instruction Manual page 79

- In the case that NMEA sentence includes GGA but without ZDA/ RMC -
The setting of "Time Zone Setting" and "Local Date" is necessary. After setting, "Time" is displayed
correctly.
- In the case that GPS is not connected to this RADAR -
The settings of "Time Zone", "Local Date", and "Local time" are necessary.
After setting, "Time" is displayed correctly by calculation with inner counter.
Set the Time Zone
Procedures 1 Press [ MENU] key.
MAIN MENU will appear.
2 Put the cursor on 5.Date/Time Setting and press [ENTER] key.
SETTING MENU will appear.
3 Put the cursor on 1.TIME ZONE SETTING
TIME ZONE SETTING MENU will appear.
4 Adjust the time with [JOG DIAL] or trackball and press [ENTER] key.
5 Press [ MENU] key.
Menu will be closed.
Set Local Date
Procedures 1 Press [ MENU] key.
MAIN MENU will appear.
2 Put the cursor on 5.Date/Time Setting and press [ENTER] key.
SETTING MENU will appear.
3 Put the cursor on 2.Local Date and press [ENTER] key.
LOCAL DATE SETTING MENU will appear.
4 Adjust the time with [JOG DIAL] or trackball and press [ENTER] key.
5 Press [ MENU] key.
Menu will be closed.
Set Local Time
Procedures 1 Press [ MENU] key.
MAIN MENU will appear.
2 Put the cursor on 5.Date/Time Setting and press [ENTER] key.
SETTING MENU will appear.
3.5 GENERAL OPERATIONS
3-25
and press [ENTER] key.


3