Change The Unit Of "Rate Of Turn; Expansion - JRC JMR-611 Instruction Manual

3 Put the cursor on 3.Local Time and press [ENTER] key.
4 Adjust the time with [JOG DIAL] or trackball and press [ENTER] key.
5 Press [ MENU] key.

3.5.10 Change the Unit of "Rate of Turn"

The unit of "Rate of Turn" indicator can be changed.
This indicator is displayed at the upper center of the screen (Turn Rate).
Procedures 1
2 Put the cursor on 3.Setting and press [ENTER] key.
3 Put the cursor on 2.Rate of Turn and then press [ENTER] key.
4 Select the unit and then press [ENTER] key.
5 Press [ MENU] key.

3.5.11 Expansion

The dimension of video display is enlarged to enhance a target. This setting is also switched by [EXP] key.
Procedures 1
2 Put the cursor on 3.Setting and press [ENTER] key.
3 Put the cursor on 3.Expansion and press [ENTER] key.
4 Select mode and press [ENTER] key.
LOCAL TIME SETTING MENU will appear.
Menu will be closed.
Press [ MENU] key.
MAIN MENU will appear.
SETTING MENU will appear.
The unit of RATE OF TURN will appear.
The unit of RATE OF TURN will be changed.
Menu will be closed.
Press [ MENU] key.
MAIN MENU will appear.
SETTING MENU will appear.
EXPANSION SETTING MENU will appear.
3-26