Example Of Scan Test Screen; Scan Test Screen Example (During Testing) - JRC Handy Search NJJ-95B Instruction Manual

2.2 Example of the Scan Test Screen
Describe the configuration for each of the scan test screens.

2.2.1 Scan test screen example (during testing)

An example of a scan test screen (during scanning) is shown in Fig. 2-4.
(1)Depth calibration value
(2)Calibration method
(3)Depth gauge
(4)Fixed cursor
(5)Sensitivity display
(1) Depth calibration value
Displays the depth calibration value set at the parameter settings screen.
The method for setting the depth calibration value can be found in 2.3.6 Depth
Calibration.
(2) Calibration method
Displays the calibration method set using the parameter settings screen.
Distance feed system displays "m" and time feed system displays "s".
The method for setting the calibration method can be found in section 2.3.5 of this manual
under "Calibration Method".
(6)Antenna Mark
Fig. 2-4 Scanning test screen example (during scanning)
- 14 -
(7)Distance moved gauge
(8)Battery capacity display
(9)Display range
(10)Image processing display
(11)External output display