Hdmi to hdmi scaler with audio embedding & de-embedding (28 pages)
Summary of Contents for CYP PRO-SDI2H
Page 1
PRO-SDI2H 12G-SDI to HDMI Converter OPERATION MANUAL...
Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
Page 4
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This 12G-SDI to HDMI Converter allows SDI signals up to 4K UHD be converted for display on standard HDMI video displays. This makes it easier for professionals to monitor or output professional SDI video production sources on standard, relatively low-cost, HDMI displays while allowing the original SDI signal to continue to be looped on to other SDI equipment in their production environment.
5. FEATURES HDMI 2.0 and DVI 1.0 compliant 1 SDI video input 3 mirrored outputs (2×HDMI, 1×12G-SDI) & 1 analogue stereo audio output Supports up to 4K UHD (12Gbps, 4K@50/60Hz 4:2:2, 8-bit) digital video input SDI input supports the following SMPTE standards: ST 292-1 Level A, ST 425-1, ST 2081-10, ST 2082-10 Looped SDI output is re-clocked SDI signal extension distance varies based on signal type: 80 meters...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel SDI IN PRO-SDIH2 HDMI SCALE SERVICE SCALE SERVICE SERVICE Port: This port is reserved for firmware update use only. SDI IN LEDs: These LEDs will illuminate to indicate the SDI format currently in use on the SDI input. PWR LED: This LED will illuminate to indicate the unit is on and receiving power.
6.2 Rear Panel HDMI OUT DC 5V SDI IN Port: Connect to SDI source equipment such as editing/ recording decks, professional cameras, or video broadcast equipment. SDI signals up to 12G-SDI are supported. SDI OUT Port: Connect to SDI receiving equipment such as editing/ recording decks, professional studio monitors, or video broadcast equipment.
8. SPECIFICATIONS 8.1 Technical Specifications HDMI Bandwidth 18Gbps SDI Bandwidth 12Gbps SMPTE Standard Support ST 292-1 Level A ST 425-1 ST 2081-10 ST 2082-10 Input Ports 1×12G-SDI (BNC) Output Ports 1×12G-SDI (BNC) 2×HDMI (Type-A) 1×Unbalanced Stereo Audio (3.5mm) Service Port 1×USB 2.0 (Micro-B) Power Supply 5V/2.6A DC...
Need help?
Do you have a question about the PRO-SDI2H and is the answer not in the manual?
Questions and answers