Table of Contents
Advertisement
Item
Factory
Default
Moisture Control
Off
Narrow Paper Speed
Mode1
Ultra Light Paper Care Mode
Off
• Calibration
Item
Factory
Default
Auto Density Mode
On
Adjust Density
Execute
Adjust Registration
Execute
Color Density
Cyan Density
0
Magenta
0
Density
Yellow Density
0
Black Density
0
Description
Sets whether to enable the condensation control. When
[Mode 1] or [Mode 2] is set, paper absorbs extra moisture at
high humidity and prevent the top of the sheets from wetting.
It may take longer time to complete printing the first page.
Sets the printing speed of narrow paper.
Mode 1:
This mode is recommended when you print on a large
number of narrow sheets of paper (216 mm or narrower).
<Note>
The narrow paper printing change to low speed. (paper
thickness: light paper to thick paper).
Mode 2:
This mode is recommended when you print a small number
of narrow sheets of paper. This mode allows you to print on
narrow sheets of paper at a normal speed.
<Note>
When printing on a large number of narrow sheets, the
machine may often enter the standby mode to adjust the
fixing temperature before shifting to the next sheet.
Mode 3:
This mode reduces the possibility of printing failure at the
edge of the paper when printing on a wide sheet of paper
after printing on a large number of narrow sheets of paper.
<Note>
The machine enters to the standby mode to adjust the fixing
temperature when changing from narrow sheets to wide
sheets.
The narrow paper printing change to low speed. (paper
thickness: light paper to thick paper).
Set to on to reduce the problems if thin paper wrinkles while
printing. Printing may become slow (paper thickness: light
paper).
Description
Selects [On] or [Off] for auto adjusting density.
Adjusting density is performed right after this menu is selected.
Color registration adjustment is performed.
Every each color, adjusts print density.
Set within the range -3 to +3. Setting a + value increases the
density of the printing result, and setting a - value decreases
the density of the printing result.
Item
Factory
Default
Print Color Tuning Pattern
Execute
Cyan Tuning
Highlight
0
Mid-Tone
0
Dark
0
Magenta
Highlight
0
Tuning
Mid-Tone
0
Dark
0
Yellow Tuning
Highlight
0
Mid-Tone
0
Dark
0
Black Tuning
Highlight
0
Mid-Tone
0
Dark
0
- 89 -
5. Management / Setting the Printer
Description
Prints a test page for checking the adjusting value to be
entered for any other C/M/Y/K Tuning menus.
Adjust the value for Highlight / Mid-tone / Dark of each color
within a range of -3 to +3.
+ : Adjusted to be darker.
- : Adjusted to be lighter.
Advertisement
Table of Contents
