Network Card Setup (Mac); Setting The Ip Address - Printronix LP844C User Manual

Network Card Setup (Mac)

You can use Network Card Setup to configure the network.
To use Network Card Setup, TCP/IP must be activated.
•

Setting the IP Address

• Configuring Web Settings
• Quitting Network Card Setup
Setting the IP Address
1
Start Network Card Setup.
Installing Software
2
Select this machine from the list.
3
Select [IP Address Settings] from the [Operations] menu.
4
Change other settings if necessary, and then click [Save].
5
Enter the administrator password, and then click [OK].
The factory default password is "123456".
•
The password is case sensitive.
•
6
Click [OK] to enable new settings.
The network card of this machine restarts.
- 166 -
6. Utility Software