Table of Contents
Advertisement
Table 7. System setup options—Display menu (continued)
Display
Brightness on AC power
Full Screen Logo
Full Screen Logo
Hybrid Graphics / Advanced Optimus
Enable Hybrid Graphics / Advanced
Optimus (when available)
Table 8. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
Enable UEFI Network Stack
HTTP(s) Boot Feature
HTTP(s) Boot
HTTP(s) Boot Modes
Table 9. System setup options—Power menu
Power
Battery 1 Charge Mode
82
Default: 50
Sets the screen brightness when the computer is running on AC power.
Default: 100
When turned on, the full screen logo is displayed if the image matches the screen
resolution.
Default: OFF
When turned on, the system allows both integrated and discrete graphics
controllers to work together for optimized capability and battery life. When
turned off, the discrete graphics controller will drive all displays to prioritize
graphics capability over battery life.
Default: On
NOTE: Linux is not supported with Hybrid Graphics enabled.
Controls the onboard LAN controller.
Default: Enabled with PXE
Enable or disable internal WLAN devices.
By default, WLAN is selected.
Enable or disable internal Bluetooth devices.
By default, Bluetooth is selected.
Enables or disables UEFI networking protocols, if they are installed and available.
Default: ON
Enable or disable HTTP(s) Boot feature.
Default: ON
Configures HTTP(s) Boot Modes.
Default: Auto Mode. HTTP(s) Boot automatically extracts Boot URL from the
Dynamic Host Configuration (DHCP).
NOTE: Provisioning of the Certificate is required to connect to HTTPs Boot
server.
Advertisement
Table of Contents
