Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest and
keyboard assembly.
NOTE: Install the solid-state drive mounts from the old palm-rest and keyboard assembly into the new palm-rest and keyboard
assembly.
Next steps
1. Install the
power
button.
2. Follow the procedure from step 6 to step 25 in
3. Install the
keyboard-controller
4. Install the
display
assembly.
5. Install the antennas.
6. Install the touchpad.
7. Install the
power-adapter
8. Install the speakers.
9. Install the battery.
10. Install the
top
heat-sink.
11. Install the
small
fan.
12. Install the
rear-I/O
cover.
13. Install the
wireless
card.
14. Install the
M.2 2280 solid-state drive
15. Install the
M.2 2230 solid-state drive
16. Install the
memory
module.
17. Install the
base
cover.
18. Follow the procedure in
76
Installing the system
board.
port.
or
M.2 2230 solid-state drive
in slot three and four.
After working inside your
board.
in slot one and two, whichever applicable.
computer.