Table 8-13 Wan Parameters; Figure 8-16 Wan Page - Nokia ONT XS-2426X-A Product Manual

Configure a XS-2426X-A indoor ONT
Network configuration
Configuring WAN

Figure 8-16 WAN page

2
Configure the following parameters:

Table 8-13 WAN parameters

Field
WAN connection list
Enabled
Connection type: IPoE
or PPPoE.
Connection mode
IP mode
Enable
NAT
Service
Enable VLAN
December 2021
Issue 1
Description
Select a WAN connection from the list to set the connection parameters.
Tap the Enable / Disable toggle to enable or disable the WAN connection.
Select the connection mode of the WAN connection:
• Route mode
• Bridge mode
Select an IP mode from the list: IPv4 or IPv6.
Click to enable the WAN connection.
Select this checkbox to enable NAT.
Enable/disable the following service types for this connection as required.
• VOIP
• TR-069
• INTERNET
• IPTV
Tap the Enable/disable toggle enable VLAN.
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
Nokia ONT
103