CONNECT-OWS
Contact
4.6
Network Settings
The Connect-IWS must be assigned two unique IP addresses before it is connected to
the base station and the local area network (LAN). When DHCP is enabled, the
remaining settings are populated automatically by the DHCP server.
Setting
Network
DHCP Enable
IP Address
Subnet Mask
IP Gateway Address
DNS Server 1
DNS Server 2
Syslog Settings
Enable Syslog
Server IP
70-00200-03-00
Installation Guidelines
Table 12: Site Survey - Network & Syslog Server Settings
Serial Gateway
Proprietary Redline Communications © 2014
Radio Management
Page
54
of 62
December 3, 2014