Rf Interference; Figure 14: Site Survey: Connect-Ow Antenna Position - Redline Connect Series Installation Manuallines

CONNECT-OWS
For best results:
Mount the antenna in a location that provides an unobstructed view of the horizon.
-
Avoid mounting the antenna close to metal objects that may block/reflect the signal.
-
To minimize susceptibility to radio interference, the antenna should generally be
-
located at least 1 m (~3.25 ft) away from any another high frequency system
antennas (e.g., microwave, GSM, CDMA, 3G) and should not be mounted within the
main beamwidth of any active (radiating) antenna system.

RF Interference

Frequency planning is an essential component of installation and it is very important to
test for RF interference at every installation site. The system will not achieve full
operational capability if there is excessive interference on the same or adjacent RF
channel. Use the built-in spectrum sweep feature to determine if a selected RF channel
is generally free from interference.
70-00200-03-00
Installation Guidelines

Figure 14: Site Survey: Connect-OW Antenna Position

Proprietary Redline Communications © 2014 Page 25 of 62 December 3, 2014