Serial Interface Ports (Data 1 & Data 2); Ethernet Ports (Eth 1 & Eth 2); Table 6: Features - Pinout For Data1 / Data 2 Port 232/485; Table 7: Features - Data Port Leds - Redline Connect Series Installation Manuallines

CONNECT-OWS
Serial Interface Ports (DATA 1 & DATA 2)
The DATA 1 and DATA 2 ports (RJ-45 socket) are serial interface ports.

Figure 5: Description - Connect-IWS DATA 1/2 and CON Port Pin Assignment

The following table lists the pinout for the DATA 1 and DATA 2 ports.
Pin
1
2
3
4
5
6
7
8
Pin
Active
RS-485
Ethernet Ports (ETH 1 & ETH 2)
The ETH 1 and ETH 2 ports (RJ-45 socket) are 10/100Base-T Ethernet interface ports
for customer use.

Figure 6: Description - Connect-IWS ETH 1 and ETH 2 Port Pin Assignment

70-00200-03-00
Installation Guidelines

Table 6: Features - Pinout for Data1 / Data 2 Port 232/485

232 485 HD1
RI -
DCD -
DTR -
GND GND
RxD D+
TxD -
CTS D-
RTS -

Table 7: Features - DATA Port LEDs

On
Blink
Off
On
Off
Proprietary Redline Communications © 2014
Description
485 HD2 485 FD1
- -
- -
- -
GND GND
- Tx
D+ Rx
- Tx
D- Rx
Description
Gateway active - no data flow
Gateway active - data flow detected
Gateway not active
RS-485 mode
RS-232 mode
Page 17 of 62
485 FD2
-
-
-
GND
Rx
Tx
Rx
Tx
December 3, 2014