Table of Contents
Advertisement
HOW TO ASSEMBLE THE
15 MM PEDAL
16.
55 NM
R
17.
REMOVE 2 SCREWS WITH A PHILIPS
SCREWDRIVER AND DETACH THE PANEL.
Version 2.0 2021 RRR-ICB1-01 Copyright by Cy-Tech GmbH 2023 | www.indoorcycling.com
INDOOR CYCLE
WRENCH
HAND TIGHT
L
WARNING!
Attach the pedal marked R on the right
crank and tighten by turning clockwise (standard
right-hand thread). Attach the pedal marked L on the
left crank and tighten by turning counter-clockwise
(left-hand thread). Please make sure that both pedals
are fastened with sufficient force (55 NM), to ensure that
the bolt does not become loose during use.
The threads are provided with TufLok® at the factory
to prevent them from becoming loose during use.
If bolts are loosened after initial assembly, we
recommend using medium-strength LOCTITE® 243
when reassembling.
18.
INSERT 2 D CELL (LR20) BATTERIES ACCORDING TO
THEIR POLARITY AND REASSEMBLE THE PANEL.
PHILLIPS
SCREWDRIVER
Advertisement
Table of Contents
