Palm VIIX Handbook page 15

Locating back panel components
Stylus
Battery
door
Stylus
Battery door
Contrast
control
Reset button
Chapter 1
Slides in and out of the slot in the back panel of the
handheld. To use the stylus, remove it from the slot
and hold it as you would a pen or pencil. Unscrew
the top of the stylus to access the reset tool.
Covers the AAA batteries that power your
handheld and charge the transmitter. See
"Installing the batteries" later in this chapter for
information on removing the battery door and
installing batteries.
Adjusts the appearance of the screen for the
clearest screen display. Depending on the lighting
conditions or temperature of the environment
where you use your handheld, you may need to
adjust the setting of the contrast control.
Under normal use, you should not have to use the
reset button. See Appendix A for information
about when and how to use the reset button.
Contrast
control
Reset
button
Serial (COM)
port door
Page 7