Advertisement
Quick Links
CONTENTS:
INSTALLATION:
1. Connecting base to main body :
x3
B
C
1A. Align main body (A) with the base plate (B) and turn in screws (C) with provided allen tool (D) until securely tightened.
2. Attaching Foam Pad to Tablet Holder
E
A
2A. Select the appropiate foam pad (E) according to the thickness of your tablet (or tablet in its case), then press adhesive side into center
of the tablet holder. As shown above.
Gooseneck Chair Clamp
PAD-UGT / PAD-UGTW
INSTRUCTION - MANUAL
A
C
x1
A
D
10mm
5mm
1mm
D
x3
B
x1
Foam Pad
Thickness:
1mm
5mm
10mm
- Use this table to determine the appropiate
foam pad (B) to use with your tablet.
Note: sizes refer to total tablet size with or
without a case
888-733-4448
E
10mm
x1
x3
5mm
1mm
Foam Pads
Tablet Thickness:
0.67-1.06in / 17-27mm
0.51- 0.91in / 13-23mm
0.31- 0.71in / 8-18mm
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-UGT
Summary of Contents for CTA PAD-UGT
- Page 1 Gooseneck Chair Clamp PAD-UGT / PAD-UGTW INSTRUCTION - MANUAL CONTENTS: 10mm Foam Pads INSTALLATION: 1. Connecting base to main body : 1A. Align main body (A) with the base plate (B) and turn in screws (C) with provided allen tool (D) until securely tightened.
- Page 2 3. Inserting Tablet to Holder **Tablet for illustration only and not included 4A. Press quick release button (1) on side of tablet 4B. Insert tablet corner against the spring arm. Push adjustable arm down holder (A) to release the adjustable end. against opposite corner (A).
Need help?
Do you have a question about the PAD-UGT and is the answer not in the manual?
Questions and answers