Setup; Setting Up The Printer - TSC PEX-2000 Series User Manual

3. Setup

3.1 Setting up the Printer

Refer to the ch.2.3 to install the print engine to an applicator.
1.
Make sure the power switch is off.
2.
Connect the print engine to the computer with the provided USB cable or available connections.
3.
Plug the power cord into the AC power cord socket at the rear of the print engine, and then plug the power cord into a properly
4.
grounded power outlet.
Note: Please switch OFF the printer before plugging in the power cord to printer power jack.
20