Alienware m16 R1 Service Manual page 44

Hide thumbs Also See for m16 R1:
Table of Contents

Advertisement

Steps
1. Route the antenna cables through the routing guides on the palm-rest and keyboard assembly.
2. Align the screw holes on the antenna holder with the screw holes on the display assembly.
3. Replace the four screws (M2.5x5) that secure the antenna holder to the display assembly.
4. Turn over the computer.
Next steps
1. Follow the procedure from step 1 to step 8 in
NOTE: The system board can be removed and installed along with the fan and heat sink. This simplifies the removal and
installation procedure and avoids breaking the thermal bond between the system board and heat sink.
2. Install the
2230 solid-state drive
3. Install the
2280 solid-state drive
4. Install the
rear-I/O cover
5. Install the
small
fan.
6. Install the
top heat-sink
7. Install the
wireless
card.
8. Install the battery.
9. Install the
base
cover.
44
Installing the system
in slot three and four.
or
2230 solid-state drive
.
board.
in slot one and two, whichever applicable.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P124f

Table of Contents