McFarlane FINALIZER 6000 Series Operation And Parts Manual
  1. Manuals
  2. Brands
  3. McFarlane Manuals
  4. Farm Equipment
  5. FINALIZER 6000 Series
  6. Operation and parts manual

McFarlane FINALIZER 6000 Series Operation And Parts Manual

Secondary tillage
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FINALIZER™ 6000 SERIES
Secondary Tillage
Read and understand the manual. This manual provides
information and procedures to safely operate and maintain
the Finalizer 6000.
PART NUMBER: 15487 — Serial Number 23543 - higher
Finalizer 6000 Series
OPERATION AND
PARTS MANUAL
Learn more at
1
Mcfarlaneag.com
www.mcfarlaneag.com
888-627-8569

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FINALIZER 6000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for McFarlane FINALIZER 6000 Series

Summary of Contents for McFarlane FINALIZER 6000 Series

  • Page 1 FINALIZER™ 6000 SERIES Secondary Tillage Read and understand the manual. This manual provides information and procedures to safely operate and maintain the Finalizer 6000. PART NUMBER: 15487 — Serial Number 23543 - higher www.mcfarlaneag.com Learn more at Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 2: Table Of Contents

    Safety Chain Troubleshooting Bystanders Parts Section Towing and Maximum Towing Speed Ordering Parts Highway and Transport Operations Dealer Contact Information Pre-towing Checklist Decals Safety Parts Drawings Prior to Connecting Unit Tow Chain Connecting to the Tractor Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 3: Introduction

    Introduction Safety General The 6000 Series Finalizer from McFarlane Mfg. features wavy, serrated Cobra disk blades, loosens the top one to Safety of the operator and bystanders is one of the main five inches of the soil yet leaves the seedbed firm. This...

  • Page 4: Safety Alert Symbols

    NOTICE Indicates that equipment or property damage can result if instructions are not followed. SAFETY INSTRUCTIONS Safety instructions (or equivalent) signs indicate specific safety-related instructions or procedures. NOTE: Contains additional information important to a procedure. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 5: Safety Icons Nomenclature

    Damaged hazard label Entanglement hazard Set parking brake Explosive separation hazard Slow vehicle placard Falling hazard Stop engine Fire hazard STOP Support stand usage High-pressure fluid hazard Use proper tools Hose damage Visually inspect Hot surface Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 6: General Operating Safety

    For maintenance safety information, refer to the 5. Relieve hydraulic fluid pressure. Maintenance section. 6. If parking the unit, make sure jack stand is lowered and retaining pin is installed. Injury Hazard Do not permit children to play on or around the stored unit. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 7: Component Nomenclature

    The Finalizer is comprised of four components: (1) Cobra disk gangs, (2) shanks with Talon™ sweep, (3) Conditioning option (Conditioning Reel or Spur-Till) and (4) Finishing configuration (3-bar harrow with single rolling basket or 5-bar harrow). Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 8: Specifications

    FN-6029-ST3RB — 28’9” FN-6032-ST3RB — 31’9” Field Capacity (acre/hr @ 6-8 mph) FN-6024-ST3RB — 15-20 FN-6029-ST3RB — 18-24 FN-6032-ST3RB — 20-26 Towing Speed Towing speeds should not exceed 20 mph (32 kph) Field operating speeds should be 6-8 mph (9-13 kph). Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 9: Display Of Hazard And Info Signs

    • Replacement parts that display a safety sign should display the same sign. 1 Turn = 1/2” Deeper NOTICE Tractor must be in constant flow mode. Do not exceed 250 PSI during field operation. 14671 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 10 14039 DC-231 WARNING 1 Turn = 1/2” Cancer and Reproductive Harm www.P65Warnings.ca.gov 14051 Deeper DC-306 14050 15461 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 11: Towing

    Do not allow anyone to stand between the tongue or hitch and the towing vehicle when backing up to the equipment. Make sure that the area is clear of children, animals, and other obstacles before using. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 12: Safety Chain

    Highway and Transport Operations SAFETY INSTRUCTIONS • Make sure the wheel cylinder transport locks are installed, the wing lock pins are in place, and the jack stand is in its storage position before transporting the unit. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 13: Pre-Towing Checklist

    11. Make sure the wing lock pins are in place. 12. Check mirrors of the tow vehicle to make sure you have good visibility. 13. Check routes and restrictions on bridges and tunnels. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 14: Safety

    2500 to 3000 psi (170 to 205 bars). High-Pressure Fluids 1. Check or tighten all connections BEFORE pressurizing system. 2. Release all pressure before removing hoses and/or valves by: a. Stopping engine. b. Holding hydraulic control levers in float or neutral position. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 15: Connecting To The Tractor

    Using a pin not intended for this type of towing can result in unexpected separation of the unit from the tow vehicle, resulting in equipment damage and personal injury. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 16 “main lift” cylinders, which raises and lowers the wheels. Connect the hydraulic hoses for this function into the port (control lever) used most commonly. 3. Disconnect the electrical connection for the rear lights from the storage socket. a. Rotate the plug. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 17 3. Move the unit to the desired location and position it for operation following the towing recommendation provided in this manual and/or any other local, State, or Federal regulations that may apply. d. Connect the plug into the tractor’s electrical socket. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 18: Operation

    Operation Initial Setup The McFarlane Finalizer is a tool that is designed to Safety handle a wide variety of field conditions. It has many WARNING adjustments that can be made to change the performance of each component on the unit as well as its overall performance.

  • Page 19: Machine Leveling

    5. Lower the unit until the sweeps are just touching the ground. Machine Leveling Raise the locking mechanism from the turnbuckle. Use the wrench (stored behind the hitch) to make the adjustment. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 20: Leveling Wing Frames

    Before leaving the tractor, shut off the engine, set the e. If the sweeps need to be reset, turn the stop crank parking brakes, and remove the ignition key. accordingly; two full turns of the crank equals 1 inch of depth adjustment. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 21: Conditioning Option Adjustment

    Conditioning Option Operation and Adjustment The McFarlane Finalizer comes with two conditioning options: a conditioning reel and a Spur-Till treader. Both are designed to mix soil with residue, pulverize large clods, remove soil from exposed root balls and anchor residue to the soil surface.

  • Page 22: Harrow And Rolling Basket Adjustment

    For increased root exposure, residue and soil mixing as Note: ypically, the angle should be set more aggressive well as residue incorporation, set the conditioning option to for increased soil leveling and less aggressive in roughly 10°. heavy residue conditions. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 23 Typical spring (finishing) settings are all three chains set with three links hanging. Typical fall settings in heavy residue are front chain with seven links hanging, middle with six, and rear with five links hanging (front bar higher than rear bar). Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 24: Preparing For Transport

    Too much spring tension will cause 3. Remove the transport locks and place over the wheel lift premature failure, especially when going through cylinder rods. Insert and lock the retaining clip. waterways or ditches. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 25: Maintenance

    Entanglement Hazard Keep hands, feet, clothing, jewelry, and long hair away from any moving parts to prevent them from getting caught. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 26: Tire And Lug Torque Specifications

    (19) (27) 3/8" (20) (33) (45) 7/16" (30) (53) (75) 1/2" (45) (80) (115) 9/16" (70) (115) (165) 5/8" (95) (160) (220) 3/4" (165) (290) (400) 7/8" (170) (420) (650) 1" (225) (630) 1320 (970) Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 27: Maintenance Schedule

    Check the gang arbor bolt torque which is defined in the “Disk Gang and Blades” section. Cotter pins and clevis pins. c. Inspect shank mount pivots for loose bolts and worn bushing inserts. Wheel retainer bolts. Hinge pin and hitch pin retainer bolts. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 28 Tighten only until a slight drag is felt on the rotating wheel. Re-install cotter pin and dust cap. Note: Clean grease fittings and replace those that are broken or missing. 5. Refer to the parts illustrations and listings for service and repair parts. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 29: Maintenance Procedures

    Note: when disassembling Spur-Till gangs, note the pivot bracket (5) with a rubber mallet. orientation of all Spur-Till wheels (left vs. right), bearings, spacers and fasteners. 4. Install the pivot bushing and secure with the pivot bolt. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 30: Axle Assembly Wear Sleeves

    3. Remove the bearing retainer caps (center bearings) and end caps (outer bearings). 4. Insert four new bearing wear sleeves. Do not replace just one sleeve. 5. Reinstall the retainers and caps. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 31: Lubrication Locations Drawing

    Lubrication Locations Drawing Add grease to the locations shown in the photo on the following page. When greasing a pin and bushing, add grease until it is visibly forced out of the joint. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 32: Hydraulic Component Safety

    Do not exceed 20 mph or tire failure will occur. NOTICE Make sure components in the hydraulic system are Keep wheel lug nuts or bolts tightened. kept clean and in good working condition. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 33: Storage

    Do not permit children to play on or around the stored unit at any time. fails due to a defect in material or workmanship, McFarlane Mfg. Co., Inc. will repair it, free of charge. Warranty service is available at dealer locations by simply...

  • Page 34: Troubleshooting

    Raise the rolling baskets by following the Rolling basket springs are Too much spring tension. instructions in the harrow and rolling basket breaking. adjustment section. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 35: Parts Section

    For replacement decals, questions, or to order parts, To ensure the greatest level of safety, all decals must be in contact your dealer: place and legible at all times. Remember, it is the user’s responsibility to maintain these decals. Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

  • Page 36: Parts Drawings

    NUT, LOCK, TOP, 1-8 BH5028 1/2 X 2-3/4 GRADE 5 HEX BOLT BHY-1070 BOLT, HEX, 1-8X7, GD8 NLT-4414 7/16 TOP LOCK NUT QT-1243 JACK, SIDEWIND, 15", 8000# LW-0025 1/4 LOCK WASHER RT-2113 TURNBUCKLE PIN ASSY Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 37 11331 STRAP BHY-1070 BOLT, HEX, 1-8X7, GD8 10944 HITCH DOM 10684 PIN, 1.25 X 9.81 NHF-1506 NUT, FLANGE, 1 1/2 BHY-5635 BOLT, HEX, 9/16 X 3 1/2, GD8 11986 NUT, JAM, 1.5-6 W SET SCREW Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 38 AXLE, WALKING TANDEM, LT NLT-3816 NUT, HEX, 3/8-16 14525 RETAINER, AXLE MOUNT BRKT 14214 FRAME, MAIN, LT NLT-1008 NUT, LOCK, TOP, 1-8 14255 FRAME, MAIN, RT WN-0063 WHEEL NUT, 5/8 NLT-5013 NUT, LOCK, TOP, 1/2-13 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 39 BH-3810 BOLT, HEX, 3/8-16X1, GD5 QT-1139 CHANNEL, BRACKET BH-5028 BOLT, HEX, 1/2-13X2.75, GD5 HYO-3021 HYD STOP VALVE, RESTRICTED BH-3120 BOLT, HEX, 5/16-18X2, GD5 11753 VALVE MOUNT BH-2510 BOLT, HEX, 1/4-20X1, GD5 11759 PLASTIC, WEAR PAD Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 40 BOLT, HEX, 1/2-13X3, GD8 14824 PLOW BOLT, 7/16-14X1.75, GD5 14262 BRACKET WASHER WASHER, FLAT, 1 BHY-6345 BOLT, HEX, 5/8-11X4.5, GD8 NLT-4414 NUT, LOCK, TOP, 7/16-14 BH-6315 BOLT, HEX, 5/8-11X1.5, GD5 NLT-6311 NUT, LOCK, TOP, 5/8-11 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 41 Wing Rest for FN-6000 Series Item Part Number Description 14311 BRACKET, WING REST BU-1236 U-BOLT, 1/2-13X3X6 NLT-5013 NUT, LOCK, TOP, 1/2-13 RT-3415 RUBBER BUMPER BH-5013 BOLT, HEX, 1/2-13X1.25, GD5 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 42 BOLT, HEX, 3/4-10X4, GD5 NLT-7510 NUT, LOCK, TOP, 3/4-10 NLT-5013 NUT, LOCK, TOP, 1/2-13 14525 RETAINER, AXLE MOUNT QT-1124 BUSHING, SPRING, 2.510 ODX21DX2 NHJ-2005 NUT, JAM, 2 10696 PIVOT POST, ADJUSTABLE QT-1277 DISK HITCH PIN, 1-1/4 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 43 NUT, LOCK, TOP, 5/8-11 10547 MOUNT TUBE, 7 SCRAPER NLT-7510 NUT, LOCK, TOP, 3/4-10 11366 SCRAPER 12780 BOLT, HEX, 5/8-11X3.25, GD8 BU-5824 U-BOLT, HEX, 5/8-2X4 NLT-6311 NUT, LOCK, TOP, 5/8-11 NLT-7510 NUT, LOCK, TOP, 3/4-10 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 44 DISK GANG SHAFT, RND, 88” 10658 NUT, FINISHED SLOTTED JAM, 1-3/4-5, PLAIN 10746 DISK GANG SHAFT, RND, 53” 12793 BLADE, DISK, COBRA, 20", 6.5mm 10829 DISK GANG SHAFT, RND, 60” RD-4925 BLADE, FLAT, 6mm, 18" Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 45 BOLT, HEX, 3/4-10 X 4, GRADE 5 BC-6340 BOLT, CARRIAGE, 5/8 X 4 BH-5018 BOLT, HEX, 1/2-13 X 1-3/4 GRADE 5 BU-5834 U-BOLT,5/8-11X3X4.5 CH-0805 PULL CHAIN, 5 LINK BH-6350 BOLT, HEX, 5/8-11 X 5 GRADE 5 FA-4105 PLATE,PIVOT Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 46 NUMBER THREE HARROW BAR (FA-600-3) FA-757 NUMBER THREE HARROW BAR (FA-700-3) FA-857 NUMBER THREE HARROW BAR (FA-800-3) FA-957 NUMBER THREE HARROW BAR (FA-900-3) FA-4105 PLATE, PIVOT BH-6340 BOLT, HEX, 5/8-11 X 4 GRADE 5 NLT-6311 NUT, TOP LOCK, 5/8-11 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 47 ARM, LIFT NLT-6311 NUT, TOP LOCK, 5/8-11 RD-4629 BAR, LOCK BC-6340 BOLT, CARRIAGE, 5/8 X 4 PC-1913 CLICK PIN, 3/16 X 1-9/16 CH-0816 LIFT CHAIN, 16 LINK BH-5018 BOLT, HEX, 1/2-13 X 1-3/4 GRADE 5 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 48 NUMBER FOUR HARROW BAR (FA-700-5) FA-856 NUMBER FOUR HARROW BAR (FA-800-5) FA-557 NUMBER FIVE HARROW BAR (FA-500-5) FA-657 NUMBER FIVE HARROW BAR (FA-600-5) FA-757 NUMBER FIVE HARROW BAR (FA-700-5) FA-857 NUMBER FIVE HARROW BAR (FA-800-5) FA-4105 PLATE, PIVOT Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 49 HYO-2103 PIN, CYLINDER CLEVIS, 1X3-1/2 14301 PLATE, CLAMP CP-3620 PIN, COTTER, 3/16X2 15079 BUSHING BU-5834 U-BOLT, 5/8-11X3X45 BH-5065 BOLT, HEX, 1/2-13X6.5, GD5 13785 LEVELER MOUNT NLT-5013 NUT, LOCK, TOP, 1/2-13 BH-5035 BOLT, HEX, 1/2-13X3.5, GD5 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 50 13969 PLATE, WASHER BC-5015 BOLT, CARRIAGE, 1/2-13X1.5, GD5 14204 BEARING, FLANGED, 1.50 RND BH-2525 BOLT, HEX, 1/4-20X2.5, GD5 14400 1-1/2"-6 SLOTTED NUT NLT-2520 NUT, LOCK, TOP, 1/4-20 14420 WELDED SHAFT 89.19" 14432 WELDED SHAFT 53.22” Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 51 NUT, LOCK, TOP, 5/8-11 BH-5018 BOLT, HEX, 1/2-13X1.75, GD5 BU-5834 U-BOLT, 5/8-11X3X45 14617 END PLATE BASKET ASSY 13074 BEARING, SEALED, 1” ID 12713 ASM, HUB 13076 SNAP RING 13077 BEARING SLEEVE W/GUARD 13079 SEAL COUNTERFACE Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 52 ROLLING BASKET, 117" 13075 V-SEAL, 1.59” ID BH-5015 BOLT, HEX, 1/2-13X1.5, GD5 NLT-7510 NUT, LOCK, TOP, 3/4-10 NLT-5013 NUT, LOCK, TOP, 1/2-13 12713 ASM, HUB BC-7535 BOLT, CARRIAGE, 3/4-10X3.5, GD8 13076 SNAP RING 13077 BEARING SLEEVE W/GUARD Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 53 Item Part Number Description 14355 BRACKET, WING LOCK BU-1235 U-BOLT, HEX, 1/2-13X5.5 HYS-1208 CYLINDER LOCK, 1-1/2X8 LP-3825 PIN, LYNCH, TOP, 3/8X2-1/2 14356 PLATE, WING LOCK NLT-5013 NUT, LOCK, TOP, 1/2-13 BH-5045 BOLT, HEX, 1/2-13X4.5, GD5 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 54 Item Part Number Description 14238 ASSY, JACK TUBE QT-1234 JACK, SIDEWIND, 15", 8000# 14822 JACK MOUNT 11033 PIN, HITCH, 5/8X4 14823 MOUNT PLATE NLT-6311 NUT, LOCK, TOP, 5/8-11 PB-0009 PIN, BRIDGE, #9 BH-6350 BOLT, HEX, 5/8-11X5, GD5 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 55 BRACKET, LIGHT, SINGLE BH-2515 BOLT, HEX, 1/4-20X1.5, GD5 12175 BRACKET, LIGHT, SINGLE, LT 14526 PLATE, CLAMP, 5"-6" 12176 BRACKET, LIGHT, SINGLE, RT BH-5040 BOLT, HEX, 1/2-13X4, GD5 LB-1106 LIGHT, AMBER-AMBER NLT-5013 NUT, LOCK, TOP, 1/2-13 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 56 WHEEL BOLT, 1/8-1.25 HD-1361 HUB, WITH RACES WDL-2505 SPINDLE HD-1362 INNER BEARING, 6-HOLE HUB HD-1371 6-HOLE HUB ASSEMBLY (Includes items 2, 3, — 4, 5, 7, 8, 10, 11, 12) HD-1363 OUTER BEARING, 6/8 HOLE HUB Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 57 GREASE SEAL, 8-HOLE HD HUB — RT-3181 8-BOLT HUB ASSEMBLY, 6000 LB (Includes items 1, 3, 4,8,10) RT-3184 HUB, WITH RACES, 8-BOLT HD HUB RT-3187 SPINDLE, HEX NUT RT-3188 DUST CAP, 6-HOLE HUB RT-3190 SPINDLE FLAT WASHER Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 58 HYDRAULIC HOSE, 1/2 X 72 HYO-1212 HYDRA GRIP, YELLOW HYF-1222 HYDRAULIC TEE, 3/4M-3/4M-3/4M HYF-4002 HYDRAULIC DISCONNECT HYH-2128 HYDRAULIC HOSE, 1/2 X 128 (6024) HYH-3220 HYDRAULIC ADAPTER, 3/4M - 3/4Morb HYH-2167 HYDRAULIC HOSE, 1/2 X 167 (6029-6032) Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 59 HYF-4002 HYDRAULIC DISCONNECT HYH-8054 HYDRAULIC HOSE, 3/8 (9/16F) X 54 HYH-8036 HYDRAULIC HOSE, 3/8 (9/16F) X 36 14839 HYDRAULIC HOSE, 3/8 (9/16F) X 40 HYF-1888 HYD TEE, 9/16M-9/16M-9/16M HYH-8104 HYDRAULIC HOSE, 3/8 (9/16F) X 104 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 60 HYDRAULIC HOSE, 3/8 (9/16F-1/2 PIPE) X 192 12213 HYDRAULIC HOSE, 3/8 (9/16F) X 144 (6029- HYO-1213 HYDRA GRIP, BLACK 6032) HYF-4002 HYDRAULIC DISCONNECT 10802 HYDRAULIC HOSE, 1/4 (9/16F) X 86 (6024) HYH-8104 HYDRAULIC HOSE, 3/8 (9/16F) X 104 (6029- 6032) Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 61 HYDRAULIC HOSE, 1/4 (9/16F) X 102 (6029- BH-2525 BOLT, HEX, 1/4-20 X 2.5, GD5 6032) NLT-2520 NUT, LOCK, TOP, 1/4-20 14847 HYDRAULIC HOSE, 1/4 (9/16F) X 223 NLT-5013 NUT, LOCK, TOP, 1/2-13 14909 RELIEF VALVE HYF-1809 HYDRAULIC TEE, 9/16M-3/4Morb-9/16M Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 62 Shank Layout Diagram for FN-6024 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 63 Condtioning Reel Layout Diagram for FN-6024 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 64 Spur-Till Layout Diagram for FN-6024 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 65 3 Bar with Rolling Basket Layout Diagram for FN-6024 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 66 Shank Layout Diagram for FN-6029 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 67 Condtioning Reel Layout Diagram for FN-6029 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 68 Spur-Till Layout Diagram for FN-6029 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 69 3 Bar with Rolling Basket Layout Diagram for FN-6029 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 70 Shank Layout Diagram for FN-6032 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 71 Condtioning Reel Layout Diagram for FN-6032 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 72 Spur-Till Layout Diagram for FN-6032 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 73 3 Bar with Rolling Basket Layout Diagram for FN-6032 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...
  • Page 74 WARRANTY REGISTRATION FORM & INSPECTION REPORT This form must be filled out by the dealer and buyer and the initialed and signed copy sent to: McFarlane Mfg. Co., Inc., 1259 South Water Street, P.O. Box 100, Sauk City, WI 53583. WARRANTY REGISTRATION This form must be filled out by the dealer and signed by both the dealer and customer at the time of delivery.
  • Page 75 Member of: 1330 Dallas St PO box 100 Sauk City, WI 53583 Phone: (608) 643.3322 Toll Free: (888) 627.8569 mcfarlaneag.com For more information email: info@mcfarlanemfg.com Copyright 2022 McFarlane Mfg. Last revised: 09/08/2022 Finalizer 6000 Series Mcfarlaneag.com 888-627-8569...

Table of Contents