Feed Motor - Canon imageFORMULA DR-M140 Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY

3. Feed Motor

1) Remove the control PCB (with mounting
plate).
(Page 3-4)
2) Remove the feed motor cable
the cable holder, and remove it from the
base unit.
Figure 3-209
3) Unhook the 2 pairs of fitting parts
and remove the cable guide
Figure 3-210
3-6
4) Unhook the fitting part at the edge of the
from
1
Note: Be careful not to break the hook on
Note: Once you have removed the feed
1
.
2
5) Remove the belt
COPYRIGHT © CANON ELECTRONICS INC. 2011
gear , then remove the gear. Next,
1
remove the 2
self-tapping), and remove the feed motor
(with belt) ensuring that it does not
4
touch the stopper
3
the gear edge because it is thin.
motor, the retard roller drive units
can also be removed.
Figure 3-211
1
Figure 3-212
screws (M3,
2
gears.
5
and gears .
2
CANON DR-M140 FIRST EDITION