Canon imageFORMULA DR-M140 Service Manual page 87

2) Base Unit
Skew (L)
Door
Document
Figure 5-227
If you place paper on the document
sensor, the document sensor lights up. If
you open the upper unit, the door sensor
lights up. If you put paper on the left or
right skew sensors and close the upper
unit, the skew sensor lights up. If you lift
up the feed selection lever to select none
separate, the separation sensor lights up.
At this time, the LED beside the lever
also lights up.
3) Rear
Flapper
Figure 5-228
If you open the straight path tray, the
flapper sensor lights up.
COPYRIGHT © CANON ELECTRONICS INC. 2011
Skew (R)
Separation
CANON DR-M140 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
4) Panel Unit
Job select
DFR
Stop
Start
Power
Figure 5-229
When a button on the panel unit is
pressed, the corresponding mark lights.
5-17