Table of Contents
Advertisement
-
Side 2: screw the 2 support bar on the low bar of the table. Install the extension table and screw it on
the table and then screw the support bar with the extension table.
g)
Install the support of foot on the feet.
h)
Take four M4x12 hex head bolts, four M6 washers and four M6 nuts and mount axle and part pulley to part 4 and
part 5 (see pic. 9). The bolts must not be tightened too much.
i) Tighten all the bolts.
j) Turn the appliance to its feet. Ask for the help to another person for this. Adjust the wheel with the bar until it touches
the ground. Secure the bolts.
10
Advertisement
Table of Contents
