Table of Contents
Advertisement
1. SECURITY WARNINGS
WARNING! When using electric tools basic safety precautions should always be followed to reduce the risk of fire,
electric shock and personal injury.
Read all these instructions before attempting to operate this product and save these instructions.
1.
Keep work area clear
Cluttered areas and benches invite injuries.
2.
Consider work area environment
Do not expose tools to rain.
Do not use tools in damp or wet locations.
Keep work area well lit.
Do not use tools in the presence of flammable liquids or gases.
3.
Guard against electric shock
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
4.
Keep other persons away
Do not let persons, especially children, not involved in the work touch the tool or the extension cord and keep
them away from the work area.
5.
Store idle tools
When not in use, tools should be stored in a dry locked-up place, out of reach of children.
6.
Do not force the tool
It will do the job better and safer at the rate for which it was intended.
7.
Use the right tool
Do not force small tools to do the job of a heavy duty tool.
Do not use tools for purposes not intended; for example do not use circular saws to cut tree limbs or logs.
8.
Dress properly
Do not wear loose clothing or jewellery; they can be caught in moving parts.
Non-skid footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
9.
Use protective equipment
Use safety glasses.
Use face or dust mask if working operations create dust.
10. Connect dust extraction equipment
If the tool is provided for the connection of dust extraction and collecting equipment, ensure these are
connected and properly used.
11. Do not abuse the cord
Never yank the cord to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges.
12. Secure work
Where possible use clamps or a vice to hold the work. It is safer than using your hand.
13. Do not overreach
Keep proper footing and balance at all times.
14. Maintain tools with care
Keep cutting tools sharp and clean for better and safer performance.
Follow instruction for lubricating and changing accessories.
2
Advertisement
Table of Contents
