Table of Contents
Advertisement
3. ASSEMBLY
INFORMATION:
Following the model, the table and/or some parts are potentially already assembled. Please check your delivery
first before. Follow the below steps if the tool is not fully assembled. We recommend the user to have a help for an
experienced person for the mounting of this table, specifically for untrained persons.
Some pieces (washers, bolts, etc.) are not provided with this tool. You can buy them in specialized stores in order
to assemble the tool. The tool must be assembled as described below, with the correct tools.
a)
Put the table on an appropriate work bench.
b)
Take four M6x16 hex head bolts, four M6 washers and four M6 nuts and mount the feet on the table. The bolts
must not be tightened too much. Do same action for the 4 foot.
c)
Take two M6x16 hex head bolts, two M6 washers and two M6 nuts and mount the guide rail on sides of the table
(one horizontal, one vertical). Screw the guide rails. Make sure longer bolts for rails are used.
d)
Use two ST4.2x13 guide bolts to install the switch box on the foot.
8
Advertisement
Table of Contents
