Hyundai HCP3000 Original Instructions Manual page 5

Keep this side up.
Risk of cutting and injuries from the rotating blade!
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of injury and damage remain.
The following hazards may arise from the structure and design of this product:

There are harmful health consequences resulting from the emission of vibrations if the product is used for long periods
of time or not properly managed and properly maintained.

There is risk of injury and property damage due to attachments or the sudden impact of hidden objects when using the
blade.

Risk of injury to persons and property caused by flying objects.

Risk of inhalation of dusts.

Serious injuries to hands and fingers by the cutting tool or the cut material if the blade is used non-correctly.
Always wear complete protective equipment and take all actions in order to reduce the risks.
Intended use
The table saw blade can be used for straight and transverse cutting of massive wood and board materials such as
chipboard, block board and fibreboard.
se the appliance as designated, the manufacturer's conditions regarding the operation, servicing and repairs must be met
U
and the safety instructions included in the Operating Instructions must be followed.
Any other use of the saw exceeding the specified extent will be considered a use in conflict with the designation. The
manufacturer will not be liable for any damage of any kind caused by using the appliance in that manner; the risk will be
bore by the user.
This table saw must only be used, repaired and maintained by persons over 18 years of age. Any metal parts must be
removed from the cut wood.
5