Table of Contents
Advertisement
TABLE OF CONTENTS
OPERATIONAL DESCRIPTION .................................... 3
BASIC SCREENS .......................................................... 3
Instructions To Access The Programming Menu ........... 5
PROGRAM ..................................................................... 6
GENERAL ....................................................................... 8
INPUTS ........................................................................... 8
Specifications and Requirements
TBS-2111-Capacities & Measurements
Brewer
Height
733 mm
TBS-2111
29 inch
TBS-2111-Dimensions & Utility Connections
Note: dimensions in parenthesis are in millimeters
TBS-2111-Electrical Configurations
Configuration
Heater
Code
Configuration
T211151
1 X 1.7kW
T211191
1 X 3KW
T211192
1 X 2.3KW
Please see wiring diagrams located in back pages for installation notes.
TBS-2111-Water Requirements
Water Connection: Inlet: 3/8 inch male flare fitting
Mains Pressure:
Minimum Flow Rate:
All commercial hot water dispensers to be supplied with filtered water from mains
The following are the factory settings-and ranges of variables that are adjustable:
Brew volume: 6 liter Batch: (default all recipes: 4 liters brew+34% bypass)
RANGE [0.50-6.00 liter BREW] [0-40% BYPASS]
*Brew volume per hour based on factory default of 11:43 minutes/6 liter 30 liters or 8 gallons/hour
Total Brew Cycle-Factory setting: 10:52 minutes [6 minute brew time+1.5 minute drip delay+2minute bypass]
RANGE [1:00-12:00 minute BREW] [0:30-12:00 minute BYPASS DELAY]
Temperature Control-as set by factory: 90°C inside hot water tank (at sea level).
-RANGE User selectable: 77-97°C/170°-207°F
-Brew Temperature may be individually set for each of the eight recipes.
Coffee Filter Size: 15" X 5 ½ "- standard FETCO # F001
FETCO TBS-2111 Hot Tea Brewer with Bypass (hot water bypass)
Width
Width
No hot water
One hot water
faucet
faucet
229 mm
292 mm
9 inch
11.5 inch
Voltage
Phase
100-120
single L, N, G
200-240
single
200-240
single L,N,PE
0.31-0.517 mPa 0.34MPa/50PSI preferred (45-75 psig ).
5.7 liter/minute (1½ gpm). Optimal water hardness between 125-250 TDS (6-13 grain)
HOW TO CALIBRATE THE FLOW RATE ................... 10
OTHER ......................................................................... 13
ERROR CODES ........................................................... 14
Parts Drawings And Wiring Diagrams .......................... 18
Hot Water Faucet Installation Instructions ................... 23
Width
Two hot water
Depth
faucets
356 mm
502 mm
14 inch
20 inch
Electrical
Wires
Connection
NEMA 5-15
Shuko
2+G
cord and plug
Australian
cord and plug
2
Empty
Filled
Hot Water Tank
Weight
Weight
14.4kg
26.3kg
32 lb
58 lb
Drawing number 1201.00041.00
KW
Amp Draw
1.3-1.8
12.3-14.7
4.4 gal/16.5 liters
3.1
10.8-12.9
30 liters/8 gallon
2.5
19.8
30 liters/8 gallon
Capacity
11.9 liter
3.1 gallon
Brew
Per hour*
Advertisement
Table of Contents
