Adjusting The Remote Control Throttle Cable - Yamaha SX150C Service Manual

INSP
ADJ
CONTROL SYSTEM
3130
ADJUSTING THE REMOTE CONTROL
THROTTLE CABLE
NOTE:
Before adjusting the remote control throttle
cable, be sure to adjust the throttle valves'
opening and engine idling speed.
1. Inspect:
• Throttle operation
Incorrect → Adjust.
NOTE:
Make sure the throttle valves are fully
closed when the remote control lever is
fully closed position.
2. Adjust:
• Remote control throttle cable length
Adjustment steps
(1) Disconnect the throttle cable joint 1.
(2) Set the remote control lever to the
fully closed position.
(3) Align the center of the throttle control
lever cam roller 2 with the mark a.
(4) Adjust the position of the throttle cable
joint until its hole aligns with the set
pin on the throttle control lever 3.
(5) Install the clip 4 and tighten the lock-
nut 5.
WARNING
The remote control cable joint must be
screwed in more than 8 mm (0.31 in).
3-8
E
3