Hobbico FlyZone Micro Ultrix Sky Screamer RTF Manual page 6

BEFORE GOING TO THE FIELD
Before attempting to operate or fly your MICRO
ULTRIX, please make sure you fully understand its
operation outlined in this section.
HOW DOES THE MICRO ULTRIX WORK?
Note: The following is a detailed description of how
you will control your MICRO ULTRIX in flight.
Please study it carefully so you will become familiar
with the operation of the transmitter when you head
for the flying site.
Your transmitter controls the height of the airplane by
operating both motors and the direction of the plane
by slowing down either the left or right motor.
1. First extend the transmitter antenna. Then switch
on the transmitter and make sure the green light is on.
2. Make sure the airplane's battery is charged.
3. Move the switch located on the left side of the
fuselage forward to the "ON" position.
CAUTION: Stay clear of the propellers once the
airplane's switch is turned on.
4. Moving the left stick forward will cause both
motors to run at full power. At this setting the plane
should climb at a 15° angle.
5. Moving the right stick to the right will cause the
right motor to slow down. This will cause the plane
to turn to the right.
6