Monitoring The Mg 3200 Trunks And B-Channels; Figure 6-1: Trunk & Channel Status Screen; Table 6-4: Ethernet Led Indicators; Table 6-5: Cpci Led Indicators - Nortel MG 3200 Installation Manual

Label LED Color
LINK
ACT
Label LED Color
PWR
SWAP READY
During correct MG 3200 operation, the ACT LED is lit green, the FAIL LED is off. Changing of the
FAIL LED to red indicates a failure.
6.2

Monitoring the MG 3200 Trunks and B-channels

To monitor the status of the trunks and B-channels:
•
Open the 'Trunk & Channel Status' screen (Status & Diagnostics menu > Channel
Status); the 'Trunk & Channel Status' screen is displayed.
To monitor the details of a B-channel, take these 2 steps:
1. In the 'Trunk & Channel Status' screen, click the numbered icon of the specific B-channel
whose detailed status you need to check/monitor; the B-channel-specific 'Channel Status'
screen appears.
2. Click the submenu links to check/view a specific B-channel's parameter settings.
H.248/SIP

Table 6-4: Ethernet LED Indicators

Green Link all OK
Yellow Transmit / receive activity

Table 6-5: cPCI LED Indicators

Green Power is supplied to the board
The cPCI board can now be removed.
Blue
The cPCI board was inserted successfully.
Figure 6-1: Trunk & Channel Status Screen
LED Function
LED Function
34
Media Gateway 3200
Document #: LTRT-73805