3: Installing The Microphone - Honeywell SILENT KNIGHT EVS Series Manual

EVS Device Installation
4.9.3 Installing the Microphone
To install the microphone follow these steps:
1. Clip the microphone onto the microphone clip.
2. Insert microphone cord through hole at the bottom of the dead front panel. See Figure 4.56.
3. Attach strain relief clip to microphone cord. The strain relief clip should have about 2.75" of microphone cord through it. .
4. Push the strain into the hole in the dead front panel.
48
EVS-125W
Figure 4.55 VBUS and EVS-125W Wiring for EVS-RVM using the EVS-VCM
Figure 4.56 Microphone Cord Inserted Through Dead Front Panel Hole
1.
Figure 4.57 Installing Strain Relief Clip
+
EVS-VCM
+
supervised,
power-limited
EVS-RVM
back of dead front
microphone
connection
2.
EVS Series Manual — P/N LS10062-001SK-E:D 3/15/2022
Installing the EVS-RVM
Class B
2.75"