Casio IT-G500 Service Manual page 71

(10) Partially peel of the SPACER/INNER CASE and fl oat the holder.
NOTE: Since the holder is connected by the FPC, carefully fl oat it.
NOTE: For WAN model, the SPACER/INNER CASE is not attached.
(11) Release the connector lock and remove 1 FPC.
SPACER/INNER CASE
Replacing of the PWB/SBAT
NOTE: Replace the PWB/SBAT at the time when replacing the MAIN PCB.
NOTE: The PWB/SBAT is secured by double-face tape.
Connector
* Part eliminated
FPC
PWB/SBAT
– 64 –
MAIN PCB
SCANNER-UNIT
D-TAPE/PWB/SBAT
IT-G500