Hardware Test / Setting; General - Casio IT-G500 Service Manual

5. HARDWARE TEST / SETTING

5-1. General

In this chapter, how to check the hardware of IT-G500 is explained.
The general fl ow to start up the test program is as follows:
Obtain the test program Diag_Itg500.zip
Unzip Diag_Itg500.zip and copy it to a MicroSD card.
(For both test object IT-G500 and opponent IT-G500)
Copy the test program from the MicroSD card to the FlashDisk.
Delete the test program from the FlashDisk.
Prepare equipment required.
(Download from website.)
Install the MicroSD card.
Prepare equipment required.
Remove the MicroSD card.
Start the test program.
Perform Initial Settings
Perform function tests.
– 13 –
IT-G500
PC
IT-G500