Page 1
CAMILINO The pushing and braking aid Translation of the original user manual 2023-02 (6.1)
Page 2
Customer service at its best Spare parts Showroom & exhibition devices With our professional service concept Repair processing Re-use we at AAT prove once again our high claim of quality and off er our clients an Technical information Complaints all-inclusive package. Product seminars ...
Page 3
Failure to observe this user manual, in particular the safety instructions, can lead to defects in the CAMILINO and endanger the operator and the occupant as well as aff ect proper functioning! There is an increased risk of injury! In the event of an infringement, claims for warranty and liability are exclud- The product is state of the art and complies with the associated safety-related requirements.
NOTE If you have a visual disability, this user manual can be downloaded at www aat-online de/gb/um/camilino. Read the user manual prior to start-up and observe the warning notices and safety instructions. In the event of reading disabilities, cover training content in more depth verbally.
DANGER The CAMILINO must not be operated in the case of severe visual impairment and/or blindness! Do not exceed the total permissible weight and the maximum person weight, as this may lead to de- fects or overload the CAMILINO. Avoid driving in heavy rain, ice, snow and on unsurfaced ground (sand, mud, loose crushed rock) to...
Position: Type plate Indicates the year the medical device was manufactured. 20XX Manufacturer Position: Type plate Shows the manufacturer of the medical device (AAT Alber Antriebstechnik GmbH) Position: Type plate Serial number of the product e.g. P1603XXXXXX Medical Device Position: Type plate...
Page 8
Adhesive label Notes Position: Drive unit Operation only by a single, trained person! Total permissible weight: 180 kg (person, wheelchair, CAMILINO) Braking/rated slope with a total weight of up to 120 kg = 17.6 % Braking/rated slope with a total weight of up to 180 kg = 10.5 % Follow the user manual! Always overcome kerbs/obstacles backwards.
Product description 4 1 Device overview Forward/Reverse switch Drive wheel Speed control Bracket ON/OFF switch Lower mount Upper mount ROLL - Idle Ball lock pin (Quickpin) Speed levels 1 - 5 Type plate including serial number Drive lever Spiral cable Locking knob for height adjustment Manufacturer’s information: Release button for drive unit...
4 2 Type plate incl serial number Product / Model Max. speed Max. total weight Manufacturer address Person weight up to Symbols (refer to chapter 3) Rated slope Barcode (refer to chapter 3) Operating voltage Serial number (refer to chapter 3) Rated power of motor 4 3 Intended purpose The pushing and braking aids are intended for their use on a manual wheelchair and to assist the ac-...
4 5 Medical requirements and indication There are no medical requirements. A pushing and braking aid assists the accompanying person while pushing and braking the wheelchair. The use of the pushing and braking aid is intended for patients who are not able to move by themselves and accompanying persons who do not have sufficient physical endurance and strength to move the patient in the wheelchair.
4 8 Technical data WARNING - Do not exceed the total permissible weight and the maximum person weight, as this may lead to defects or overload the CAMILINO. NOTE - Observe the technical data. CAMILINO Technology Dimensions Refer to chapter "Dimensional drawing"...
4 11 Accessories NOTE - Only use AAT Alber Antriebstechnik GmbH accessories. Bracket Charging cable for vehicle Voltage converter Spoke protector Lead gel battery pack (optional) Power cable (only required when used with lead gel battery pack) Battery bag (only required when used with lead gel battery pack)
Mounting and start-up 5 1 Battery pack WARNING - Never short-circuit or connect the poles of the battery pack to avoid electric shocks! CAUTION - Plug-in contacts must be dry! NOTE - The battery pack is usually already installed on delivery. If the battery pack has been removed, e.g.
5 4 Switching on the device DANGER - The parking brakes of the wheelchair must be adjusted correctly, as the CAMILINO does not replace them! WARNING - Before start-up, check electronic function, anti-tip support and bracket to avoid malfunctions!
5 5 Fixing the CAMILINO to the wheelchair DANGER - Only use the CAMILINO with locked ball lock pins, otherwise parts can come loose abruptly! DANGER - The wheelchair wheels must not be removed when using the CAMILINO as the...
Remove the CAMILINO from the wheelchair Perform the installation steps performed while mounting in reverse order. 1. Detach the CAMILINO from the bracket (chapter 5.5) 2. Push in the handle unit (chapter 5.2) 3. Remove the battery pack (chapter 5.1)
WARNING - Never reach into rotating/moving parts to avoid crushing. WARNING - If the drive elements become blocked or when the driving behaviour changes, switch off the CAMILINO immediately and do not use it. WARNING - Climbing ability with a person weight of approx. 80 kg = 18 %.
NOTE - Always switch the CAMILINO to "ROLL" to move at idle speed, otherwise it cannot be pushed. NOTE - Never use the handle unit of the CAMILINO to pull/lift, because it has not been de- signed for this. Use the pushing handles of the wheelchair.
» The direction changed while driving. Emergency stop function When you let go of the joystick the CAMILINO stops automatically on the flat surface within 1 meter depending on the weight of the transported person, the ground, the terrain profile, etc. 7 2 Folding the anti-tip support out/in DANGER - Never use without anti-tip support to prevent the wheelchair from tipping backwards. NOTE - Fold up the anti-tip support to overcome kerbs/obstacles, because otherwise it could be damaged.
7 3 Overcoming obstacles NOTE - Never use the handle unit of the CAMILINO to pull/lift, because it has not been de- signed for this. Use the pushing handles of the wheelchair. NOTE - Observe the wheelchair manufacturer’s information on the maximum obstacle height...
This also applies to returns to the specialist trade or the manufacturer. Information by the manufacturer: The battery pack of the CAMILINO (25.2 V / 11.4 Ah ) is approved for air freight transport according to DOT + IATA. However, make sure you contact the airline company in advance before boarding a flight.
Information by the manufacturer: The battery pack is maintenance-free and recharge- able. New batteries only reach their full capacity after several charging cycles. During the charging process, the CAMILINO cannot be operated. Charge battery pack Take out the battery pack Connect the charger.
Page 25
LED green = battery full LED orange = battery is approx. 6 hours charging Charge the battery pack in the motor vehicle Switch off the CAMILINO. Take out the battery pack. Connect the voltage converter » While doing so, pull the and the charger.
Page 26
Information on the charger Possible error Charger camilino Observe the manufacturer’s » Battery capacity 16 Ah. LED does not light up. information in the charger’s Contact the manufacturer! user manual!
NOTE - Do not use acidic substances such as orange cleaner! Wipe the surfaces of the If you want to disinfect the Use household disinfectants. CAMILINO with mild household CAMILINO, carry out a wipe » Observe the manufacturer’s cleaning agents. disinfection. information.
WEEE Directive does not apply in all European countries. 8 4 Long-term storage If the CAMILINO is not used for an extended period of time (e.g. over several months), observe the following information: •...
8 6 Reuse (change in operator) The term reuse is used when the AAT product of patient X is to be used for another patient Y. In addition, there is a reuse when a patient receives a different wheelchair and therefore requires new add-on parts. Please contact the manufacturer, the AAT field staff or the authorised specialist shop.
The CAMILINO cannot be switched on Does the problem persist? Yes: Notify the manufacturer, the AAT field service, the authorised specialist dealer. CAMILINO switched on? No: Switch it on. Idle activated? Yes: Deactivate. Release button pulled? No: Pull out to the mark. The CAMILINO does not drive Does the problem persist? Yes: Notify the manufacturer, the AAT field service, the authorised specialist dealer.
For the battery pack, always assuming correct care and maintenance, AAT Alber Antriebstechnik GmbH grants a warranty of twelve months from the date of purchase. The warranty on the CAMILINO does not cover faults which are due to: •...