Related Manuals for AAT CAMILINO
Summary of Contents for AAT CAMILINO
- Page 1 CAMILINO The pushing and braking aid Translation of the original user manual 2018-01 (2.1)
- Page 2 Customer service at its best Spare parts Show room exhibition devices With our professional service concept AAT proves once again its high claim Repairs processing Re-use of quality and off ers its clients an Technical advice ...
- Page 3 DIN EN 12182, DIN EN 12184 and the relevant parts of ISO 7176. WARNING Failure to observe this user manual, in particular the safety instructions, can lead to defects in CAMILINO, endanger the operator and the occupant and impair the function! There is an increased risk of injury! In the event of an infringement, claims for warranty and liability are excluded! The product is state of the art and complies with the associated technical safety requirements.
-
Page 4: Table Of Contents
Fix CAMILINO to the wheelchair........15... -
Page 5: Symbols And Safety Instructions
Read the user manual prior to start-up and observe the warning notices and safety instructions. In the event of reading difficulties, training contents must be further expanded on verbally. The user manual must be kept in a safe place after reading through it. It does not consist exclusively of flame retardant substances. Keep CAMILINO away from sources of ignition. CAMILINO can interfere with highly sensitive electromagnetic fields of other electronic devices (e.g. anti-theft devices). Stability tests were performed under laboratory conditions. CAMILINO can behave differently under real conditions compared to laboratory tests. -
Page 6: Explanation Of The Symbols On The Packaging
To avoid being crushed, never reach into rotating/moving parts! DANGER CAMILINO must not be operated in the case of severe visual impairment and/or blindness! Do not exceed the total permissible weight and the maximum person weight, as this may lead to... -
Page 7: Explanation Of The Symbols On The Device
EC Directives 2006/42/EC, 2007/47/EC and 93/42/EC Serial number of the product e. g. P1203XXXXXX Note on the user manual The user manual must be observed! www.aat-online.de 24 V - Electrical voltage / V = Volt Inspection plate for technical safety testing (see chapter 8 5) -
Page 8: Product Description
Product description 4 1 Device overview Forward/reverse switch Bracket Speed controller Lower holding fi xture ON/OFF switch Upper holding fi xture Ball locking bolt (quick-release pin) ROLL – Idle Type label with serial number Speed levels 1-5 Driving lever Spiral cable Fixing knob for height adjustment Release knob for the drive unit Manufacturer information: Lithium-ion battery pack... -
Page 9: Indication And Intended Use
CAMILINO is suitable for indoor and outdoor use. CAMILINO is designed to be operated by only one person. This person must be trained and physically and mentally able to safely operate CAMILINO! Sufficient vision is essential for operation! It needs to be borne in mind that the use of a pushing and braking aid can entail a greater degree of risk and requires more skills than those required to operate a wheelchair. -
Page 10: Technical Data
4 4 Technical data WARNING – Do not exceed the total permissible weight and the maximum person weight, as this may lead to defects or an overloading of CAMILINO! NOTE – Observe the technical data. Technology CAMILINO Drive: Height = 824 mm–1141 mm, Dimensions Width = 603 mm, Depth = 546 mm–590 mm... -
Page 11: Dimensional Drawing
Datum Name Baugruppe Artikelnummer bearb. 12.05.2017 Kramer 038987 gepr. Benennung Camelino-kpl. AAT Alber Antriebstechnik GmbH Ehestetter Weg 11 Normen im Zeichnungsfeld vorrangig Zeichnungsnummer Toleranzen Werkstück- Werkstoff D-72458 Albstadt Rauheit DIN ISO 2768-1-m / DIN ISO 2768-2-m kanten DIN ISO 13715 Tel.: 07431/1295-0... -
Page 12: Accessories
4 7 Accessories NOTE – Only use AAT Alber Antriebstechnik GmbH accessories. Bracket Motor vehicle charger Voltage converter Spoke protector Adapter box (only required when using the lead gel battery pack) Charger (only required when using the lead gel battery pack) -
Page 13: Assembly And Start-Up
Assembly and start-up 5 1 Battery pack WARNING – Never short-circuit or connect the poles of the battery pack to avoid electric shocks! CAUTION – Plug-in contacts must be dry! NOTE – As a rule, your battery pack is already installed at the time of delivery. If the battery pack is removed, e.g. -
Page 14: Upper And Lower Mounting Rod
5 4 Switching on DANGER – the wheelchair’s parking brakes must be adjusted properly as CAMILINO does not replace these! WARNING – Prior to start-up, check the electronic function, anti-tilt support and bracket to avoid malfunctions! NOTE –... -
Page 15: Fix Camilino To The Wheelchair
5 5 Fix CAMILINO to the wheelchair DANGER – Only use CAMILINO with bolted ball locking bolts, as otherwise parts can suddenly become loose! DANGER – The wheelchair’s wheels must not be removed when using CAMILINO, as CAMILINO does not replace these! -
Page 16: Disassembly
Remove CAMILINO from the wheelchair Perform the steps performed during the assembly in reverse order. 1. Remove CAMILINO from the bracket (chapter 5.5) 2. Insert the handle unit (chapter 5.2) 3. Remove the battery pack (chapter 5.1) -
Page 17: Operation
WARNING – Never reach into rotating/moving parts to avoid being crushed! WARNING – If the drive elements become blocked or when the driving behaviour has been altered, switch off CAMILINO immediately and do not use it! WARNING – Climbing ability for a person of a weight of approx. 80 kg = 18%. -
Page 18: Driving With Camilino
NOTE – Always switch CAMILINO to ‘ROLL’ to move to idle mode, as it will otherwise not be possible to push it. NOTE – Never pull on or lift the handle unit of CAMILINO as this has not been designed for this purpose. Use the wheelchair’s push handles! NOTE –... -
Page 19: Folding In/Folding Out The Anti-Tilt Support
Emergency stop function When the control lever is disengaged, CAMILINO automatically stops on the surface level within 1 metre depending on the weight of the transported person, the ground, the terrain profile, etc. 7 2 Folding in/folding out the anti-tilt support DANGER – Never use without the anti-tilt support to prevent the wheelchair from tilting backwards! NOTE –... -
Page 20: Overcoming Obstacles
7 3 Overcoming obstacles NOTE – Never pull on or lift the handle unit of CAMILINO as this has not been designed for this purpose. Use the wheelchair’s push handles. NOTE – Observe the wheelchair manufacturer’s information on the maximum obstacle height in the user manual without fail! NOTE –... -
Page 21: Transport
7 6 Transport WARNING – Do not use CAMILINO with wheelchair as a seat in a vehicle! WARNING – Secure according to valid statutory provisions during transport in vehicles/aeroplanes! CAUTION – Switch off during transport! CAUTION – Observe the vehicle’s weight specifications! NOTE – Store in a frost-free environment at least one hour prior to start-up... -
Page 22: Battery Pack And Charger
Manufacturer's information: The battery pack is maintenance-free and rechargeable. New batteries only reach their full capacity after several charging cycles. During the charging pro- cess, CAMILINO cannot be operated. Charge the battery pack Remove the battery pack Connect the charger. - Page 23 LED green = battery full LED orange = battery is approx. 6 hours charging Charge the battery pack in the motor vehicle Switch off CAMILINO. Remove the battery pack. Connect the voltage converter » While doing so, pull the and the charger.
-
Page 24: Cleaning
WARNING – Test all safety-relevant functions after cleaning! WARNING – Do not smoke during cleaning! NOTE – Keep CAMILINO away from sources of ignition! NOTE – Clean the drive unit in the event of soiling/deposits! NOTE – Clean the wheelchair according to the manufacturer’s information! NOTE –... -
Page 25: Disposal
Observe the safety instructions in chapter 8.1 for placing the battery pack in storage! If the CAMILINO is to be put into operation again, clean the wheelchair and the product (chapter 8.2). Check whether a technical safety test must be performed (See chapter 8.5.). -
Page 26: Technical Safety Testing
8 6 Reuse (change in operator) The term reuse is used when the AAT product of patient X is to be used for another patient Y. In addition, there is a reuse when a patient receives a different wheelchair and therefore requires new add-on parts. Please contact the manufacturer, the AAT field staff or the authorised specialist shop. CAMILINO is suitable for re- A technical safety test and use. -
Page 27: Corrective Action/Recall
Is the battery pack empty? Yes: Charge! switched on Does the problem still exist? Yes: Notify the manufacturer, the AAT field staff, the authorised specialist dealer! Is CAMILINO switched on? No: Switch on! Idle enabled? Yes: Disable! CAMILINO cannot be driven Is the release knob pulled out? No: pull out until the marking! -
Page 28: 10 Warranty And Liability
AAT Alber Antriebstechnik GmbH assumes the guarantee for the battery pack, provided it is properly maintained, for a period of twelve months from the date of receipt. The CAMILINO guarantee does not cover defects that are attributable to: •... - Page 29 Notes:...
- Page 30 Notes:...
- Page 31 Notes:...
- Page 32 AAT Alber Antriebstechnik GmbH Postfach 10 05 60 · 72426 Albstadt · Germany Tel.: +49 (0) 74 31 12 95-0 Fax: +49 (0) 74 31 12 95-35 info@aat-online.de · www.aat-online.de Serial number:...
Need help?
Do you have a question about the CAMILINO and is the answer not in the manual?
Questions and answers