Weight Limits - HAMPTON BAY THD338399.1a Use And Care Manual

Assembly (continued)
7
Installing wall cabinets to the
wood wall
□ Drill 2/16" diameter holes (2.5mm) in the wood wall , height
corresponding with the cross bars (C) holes ,through cross bars
hole using four 3" screws (i) tightening the 2-door wall cabinet
into the wood wall hole.
NOTE: Fasten cabinets to the dry wall using the appropriate 3"
screws and wall anchors (not supplied) through the hanging back
rails and into wood studs. First drill a pilot hole in the cabinet
hanging rails in line with location of the all wood studs.
C
i
C
A
C
suggest the height of cabinet
above the ground is 60 inch to
70 inch height , if you are not
satisfied with the size of the
height , can be adjusted
according to the individual's
thoughts , finally in the same
way to the wall of the
cabinets.
WEIGHT LIMITS (option)
□ This unit has been designed to support the maximum loads shown.
Exceeding these load limits could cause sagging, instability,
product collapse, and/or serious injury.
WARNING: Please ensure that all the objects are removed
before moving the assembled unit. The unit must be lifted
by more than one person, not dragged or pushed. Failure
to do so will cause product damage, instability, product
collapse, and/or serious injury.
9
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM