Getting started
Using the remote control unit
Using the rem ote control, you can operate not only all the functions of the unit but also basic functions of your TV.
To install batteries in the remote control unit
The battery com partm ent is located on the back of the rem ote control unit.
1
Press dow n on the point show n by the arrow at the top of the com partm ent cover,
and pull up the cover to open the com partm ent.
2
Place the tw o accessory R6P (SUM -3)/AA(15F) batteries in the rem ote control
according to the polarity m arkings (" +" and " –" ) inside the com partm ent and on the
batteries.
3
Place the cover over the com partm ent, and press dow n lightly.
•
The batteries w ill last about six m onths w ith norm al use. If the functions of the rem ote control becom e erratic,
replace the batteries. See below for m ore inform ation.
Precautions for the safe use of batteries
Observe the follow ing precautions for the safe use of batteries. If they are used im properly their life w ill be shortened,
they m ay burst or their contents m ay leak.
Precaution
• Remove the batteries from the remote control if it is not going to be used for a long period of time.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix them w ith other refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types, w hen replacing them.
15