Jasic TIG200 Manual page 2

Thank you for selecting this new JASIC equipment!
This operating manual contains important information on the use and maintenance of this
product, as well as safe handling of the product. Please refer to technical parameters of the
equipment in Technical Parameter section in this manual, and read the manual carefully
before using the equipment for the first time. For your own safety and that of your working
environment, please pay particular attention to the safety instructions in the manual and
operate the equipment according to the instructions. For more information on JASIC
products, please contact JASIC Technology, consult an authorized JASIC dealer or visit
JASIC website at www.jasictech.com.
Disclaimer
Shenzhen JASIC Technology Co., Ltd. solemnly promises that this product is manufactured according
to relevant domestic and international standards, and that this product conforms to EN60974-1
International Safety Standard. Patents protect the relevant design scheme and manufacturing technology
adopted in this product.
1.
Whilst every effort has been made to ensure that the information contained within this manual is
complete and accurate, no liability can be accepted for any errors or omissions. Please note products are
subject to continual development and may be subject to change without notice.
2. Though contents in this manual have been carefully checked, there may be inaccuracies. Please do not
hesitate to contact us in case of any inaccuracy.
3. Do not copy, record, reproduce or transmit the contents of this manual without prior permission from
JASIC.
Manufacturer: Shenzhen JASIC Technology Co., Ltd.
Registered Trademark: JASIC
Registered Address: No.3 Qinglan 1st Road, Pingshan District, Shenzhen, Guangdong, China
Postcode: 518118
Tel:+86 ( 0755) 8670 6250 Fax: +86 ( 0755) 27364108
Website: www.jasictech.com E-mail: sales@jasictech.com
Page 2