Related Manuals for APV Grassland Pro GP 300 M1
Summary of Contents for APV Grassland Pro GP 300 M1
- Page 1 GRASSLAND PRO HARROW GP 300 M1 OPERATING MANUAL PLEASE READ CAREFULLY BEFORE COMMISSIONING! Translation of the original operating manual Version: 1.9 EN; item number: 00601-3-675...
-
Page 2: Table Of Contents
TABLE OF CONTENTS EC DECLARATION OF CONFORMITY ..................4 UK CONFORMITY ASSESSED ...................... 5 IDENTIFICATION OF THE IMPLEMENT ..................6 SERVICE ............................6 WARRANTY ........................... 7 Warranty activation ......................7 SAFETY INFORMATION ........................ 7 Intended use ........................7 General safety-related instructions and accident prevention regulations ......8 Mounted implements ...................... - Page 3 17.3 Disposal ..........................23 CROPPING TIPS FOR USING THE GP 300 M1 ................23 ACCESSORIES ..........................24 INDEX ............................26...
-
Page 4: Ec Declaration Of Conformity
This declaration loses its validity if there are any changes to the mounted implement that are not approved by APV - Technische Produkte GmbH. Designation of the mounted implement model series:... -
Page 5: Conformity Assessed
This declaration loses its validity if there are any changes to the mounted implement that are not approved by APV - Technische Produkte GmbH. Designation of the mounted implement model series:... -
Page 6: Identification Of The Implement
If you still have questions regarding the handling of this implement despite the information provided in this operating manual For questions regarding spare parts To order maintenance and servicing work Service address: APV - Technische Produkte GmbH Telephone: +43 2913 8001-5500 Zentrale: Dallein 15 Fax: +43 2913 8002 A-3753 Hötzelsdorf Email: service@apv.at AUSTRIA... -
Page 7: Warranty
WARRANTY ACTIVATION Every APV implement must be registered immediately after delivery. The registration activates the claim for warranty services and APV can guarantee the best service. To activate the warranty for your implement, simply scan the QR code with your smartphone - you will then be taken directly to the service area on our website. -
Page 8: General Safety-Related Instructions And Accident Prevention Regulations
GENERAL SAFETY-RELATED INSTRUCTIONS AND ACCIDENT PREVENTION REGULATIONS The warning and information signs applied to the implement provide important instructions for safe operation. These may not be removed in any case, observe them for the sake of your own safety! ... - Page 9 The operator/user must ensure that no one is standing in the vicinity of the implement, when it or its components are moved via the tractor hydraulic system or when the roller is being lifted or lowered. Visual check by the driver! ...
-
Page 10: Mounted Implements
MOUNTED IMPLEMENTS Only APV implements and accessories may be mounted on the implement. Do not stand between the tractor and the implement when actuating the external controls for the three- point mounting! ... -
Page 11: Tyres
The platform kit must only be used as a maintenance walkway. An ascent must be established conforming to the standards. This ascent is available from APV. When not in use, the steps must be folded up and secured. -
Page 12: Information Signs / Hazard Labels
During the loading procedure, avoid any contact with the treated seed and wear gloves, a dust mask and safety glasses. PLEASE NOTE! Misprints, errors and omissions excepted. INFORMATION SIGNS / HAZARD LABELS Pay special attention to the stickers on the implement, as they warn you of specific dangers! Read and observe the Do not stand on the Be careful with... -
Page 13: Operating Manual
Loading hooks. When loading the implement, attach the ropes or chains to these points! OPERATING MANUAL MOUNTING ON THE TRACTOR The air pressure in the rear tractor tyres should be 0.8 bar during operation. If the tyres have a lower load capacity, increase the pressure. -
Page 14: Layout And Mode Of Operation
LAYOUT AND MODE OF OPERATION Cambridge roller Tine brackets 8 mm tines Tines 10 or 12 mm Levelling plate Cat II three-point linkage roller cylinder Figure 5 Thanks to its robust and compact design, the Grassland Pro Harrow GP 300 M1 is ideal for new seeding, reseeding, and controlling grass weeds on grassland. -
Page 15: Adjusting The Series Of Holes
During operation, the top link on the implement side must always be attached in the elongated slot. For normal operation, the pin should be in the middle of the elongated slot. If you want to use the GP 300 M1 with the roller lifted, i.e. the roller in the highest position and the roller cylinder completely retracted, you must firmly attach the top link on the implement side. -
Page 16: Use Of Individual Tools
10.4 USE OF INDIVIDUAL TOOLS With the GP 300 M1, it is possible to use the individual tools Levelling plate Harrow Roller Separately or in any combination. For example: you can use the roller alone by completely extending the roller cylinder. -
Page 17: Tine Safety
3. As shown in Figure 8, the 8 mm tines must be fastened with the bolt. Ensure that the bolt rests firmly on the tine and that all tines form a straight line. The large washer should rest on the tine, and the small washer on the yellow plate. -
Page 18: Technical Data
12 TECHNICAL DATA Type designation GP 300 M1 Levelling with leaf springs with wear plate 2 rows of aggressive round spring tines Mode of operation: 2 rows of harrow round tines Pressure-adjustable reconsolidation Working width Transport width: Dimensions in m (W x H x D): 3 x 1.3 x 1.9 m Working depth: 40 mm... -
Page 19: Road Transport Of The Gp 300 M1
ROAD TRANSPORT OF THE GP 300 M1 13.1 GENERAL Make sure than none of the safety splints or similar were lost during operation. Comply with the regulations of your country's legislation. Only relieve the hydraulic hoses at home by putting the tractor control unit into float position. ... - Page 20 Now enter the calculated actual front axle load and the permissible front axle load specified in the tractor operating manual in the following table. Calculation of the actual total weight G If the required minimum rear ballast (GH) is not reached with the rear-mounted implement (GH min), the weight of the rear-mounted implement must be increased to the weight of the minimum rear ballast! Now enter the calculated total weight and the permissible total weight specified in the tractor operating manual in the following table.
-
Page 21: Lighting Circuit Diagram
14 LIGHTING CIRCUIT DIAGRAM Legend: Right 12 V plug, 7-pin Rear light, right Turn signal Rear light Brake light Left Rear light, left Brake light Rear light Turn signal Plug and cable assignment Desi Colour Function Yellow Turn signal, left Figure 12 White Earth... -
Page 22: Hydraulicdiagram
15 HYDRAULICDIAGRAM Hydraulic roller adjustment: Legend: Control unit Hydraulic couplings Hydraulic roller cylinder Hydraulic locking block Figure 13 LUBRICATION SCHEDULE The following bearing points must be regularly (approx. every 10 operating hours) lubricated with universal grease: Figure 14: Position of the grease nipples... -
Page 23: Decommissioning, Storage And Disposal
DECOMMISSIONING, STORAGE AND DISPOSAL 17.1 DECOMMISSIONING THE IMPLEMENT To ensure that the implement remains fully functional, even if it is out of operation for longer periods of time, it is important to take precautions for storage: for this purpose, observe chapter 6.2 and 11.1. 17.2 STORAGE OF THE IMPLEMENT ... -
Page 24: Accessories
The optimal strength and depth setting, forward speed and the adjustment of the tines and seeding rate must be set with your understanding of the correlations between the soil properties and weather conditions, which can vary greatly in different regions. ACCESSORIES ... - Page 25 GP 300 dispersion plate installation accessories kit Item no.: 06000-2-012 Figure 18 Toolbox accessories kit Item no.: 06004-2-115 Figure 19 Sensor set – Radar + top link lifting unit sensor for GP 300 Item no.: 06000-2-013 Figure 20...
-
Page 26: Index
INDEX Accessories ............ 24 Minimum ballasting ......... 19 Accident prevention regulations ......8 Mounted implements ........10 Adjusting the series of holes ......15 Mounted seeders ..........11 Bearing ............23 Mounting on the tractor ........13 Changing the tines ......... 16 Operating Manual ........ - Page 27 NOTES...
- Page 28 APV – Technische Produkte GmbH Zentrale: Dallein 15 AT - 3753 Hötzelsdorf Tel.: +43 2913 8001 office@apv.at www.apv.at...
Need help?
Do you have a question about the Grassland Pro GP 300 M1 and is the answer not in the manual?
Questions and answers