Iq Gateway Operation; Iq Gateway Displays And Controls; Iq Gateway Led States - enphase Envoy-S Installation And Operation Manual

IQ Gateway Operation

IQ Gateway Displays and Controls

You can track system installation progress with the Enphase Installer App mobile app.
The LEDs on the IQ Gateway are solid green when a function is enabled or performing as expected,
flashing when an operation is in progress, or solid amber when troubleshooting with Installer App is
required.
— Network Communications LED: Green when IQ Gateway is connected to Enphase Installer
App.
— AP Mode LED: Green when IQ Gateway's AP Wi-Fi network is available.
— AP Mode Button: Press to enable IQ Gateway's AP Mode for connecting with
a mobile device. Hold for 5 seconds to start WPS connection to a router.
— Power Production LED: Green when microinverters are producing power.
— Device Communications LED: Green when microinverters are communicating
with IQ Gateway.
— Device Scan Button: Press to start/stop 15-minute scan for microinverters over
the power line.

IQ Gateway LED States

LED
All
Network
Communications
AP mode
Power
production
Device
Communications
21
State
Flashing amber in unison
Flashing green sequentially
Solid green
Flashing green
Solid amber
Off
Solid green
Off
Solid green
Flashing green
Solid Amber
Off
Solid Green
Flashing Green
Solid Amber
Off
© 2022 Enphase Energy Inc.
IQ Gateway Metered Installation and Operation
Description
The IQ Gateway is booting up
Software upgrade in progress
Communicating with Enphase Installer App
WPS connection in progress or the IQ
Gateway is attempting to connect to
Enphase Installer App
Local network connection only
No network connection
AP mode enabled:
IQ Gateway Wi-Fi network available
AP mode disabled:
IQ Gateway Wi-Fi network unavailable
All communicating devices are producing
Device upgrade in progress
At least one device is not producing
Devices are not producing or
communicating (low light or night time)
All devices are communicating
Device scan in progress
At least one device is not communicating
Devices are not
communicating (low light or
night time)
15 Nov, 2022