Powering Off The Projector - Optoma DV11 User Manual

INSTALLATION
18 DVD Projector
*
Type of disc
DVD
VCD
Audio CD
MP3/JPEG
WMA
JPEG

Powering Off the Projector

1. Press the [Power] or [Stand By] button to turn off the pro-
jector lamp, you will see a message "Power off the lamp?
Picture Mute" displayed on the projector's screen. Press the
[Power] or [Stand By] button again to confirm, otherwise the
message will disappear after 5 seconds.
Please note that if the key
will enter the "Picture Mute" mode and no image will be dis-
played. To exit the "Picture Mute" mode, press the [Power]
or [Stand By] button again.
2. The cooling fans continue to operate for about 60 seconds for
cooling cycle and the Power LED will flash green. When the
Power LED begins flashing blue, the projector has entered
standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
[Power] or [Stand By] button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
DVD compatibility type
Diameter
12cm
12cm
12cm
12cm
12cm
12cm
is pressed instead, the projector
Recorder
DVD data format: com-
pressed digital audio +
compressed digital video
MPEG compressed digital
audio + compressed digi-
tal video
CD-DA: digital audio
Compressed digital audio
Compressed digital audio
Digital Photo