Adjusting The Projected Image; Adjusting The Projector's Height - Optoma DV11 User Manual

INSTALLATION
1. Elevator Button
2. Elevator Foot
3. Tilt-adjustment
Feet
20 DVD Projector
*

Adjusting the Projected Image

Adjusting the Projector's Height

The projector is equipped with three adjustable feet to modify
the height of the projector.
To raise or lower the image:
1. Locate the elevator foot. Press the elevator button  to
extend the foot so it may be adjusted.
2. While holding down the elevator button, adjust the foot
to the desired height , then release the button to lock the
elevator foot into position.
3. Use  to fine-tune tilt-adjustment.
4. Lower the projector so it rests on its foot; adjust as
needed.
3
2 1
3