Powering On/Off The Projector; Powering On The Projector - Optoma DV11 User Manual

INSTALLATION
N N
ote ote
Turn on the projector
first and then select the
signal sources.
16 DVD Projector
*

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash blue.
3. Turn on the lamp by pressing [Stand By] button on the con-
trol panel. And the Power LED will turn green. 
The first time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically
within "System" menu; check that "Source Lock" has been
set to "Off".
If you connected multiple sources at the same time, press the
▀■
[Source] button on the control panel or direct source key on the
remote control to switch between inputs.
1 2