4. The projector cannot be turned on immediately following a
power off procedure.
Warning Indicator
When the "LAMP" indicator lights solid orange, the projec-
▀■
tor will automatically shut itself down. Please contact your
local reseller or service center.
When the "TEMP" indicator lights solid orange, it indicates
▀■
the projector has been overheated. The projector will auto-
matically shut itself down.
Under normal conditions, the projector can be switched on
again after it has cooled down. If the problem persists, you
should contact your local dealer or our service center.
When the "TEMP" indicator flashes orange for about 10 sec-
▀■
onds, it indicates the fan has failed. Please contact your local
dealer or our service center.
When the "TEMP" indicator flashes orange, it indicates the
▀■
photo sensor failed. Please contact your local dealer or our
service center.
When the "LAMP" indicator flashes orange, it indicates the
▀■
color wheel sensor failed. Please contact your local dealer or
our service center.
INSTALLATION
DVD Projector
19
*