On-Screen Display Menus; How To Operate Projector Menu - Optoma DV11 User Manual

USER CONTROLS
28 DVD Projector
*

On-screen Display Menus

The Projector has multilingual On-Screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.

How to Operate Projector Menu

1. To open the OSD menu, press [Projector Menu] on the Remote Con-
trol or press [Menu] on Control Panel.
2. When OSD is displayed, use
main menu. While making a selection on a particular page, press
key to enter sub menu.
3. Use keys to select the desired item and adjust the settings by
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press [Projector Menu]/[Menu] to confirm, and the screen will
return to the main menu.
6. To exit, press [Projector Menu]/[Menu] again. If you don't press
any key, the projector will automatically disappear after 30 seconds.
The OSD menu will close and the projector will automatically save
the new settings.
Main menu Sub-menu
keys to select any item in the
Item