Half Shaft - Scania L Series Product Information

Recovery and shunting

Half shaft

The half shafts must be removed on both the left-hand and right-hand sides.
Apply the parking brake.
Clean the area around the half shaft flange.
Remove nuts and cones. Knock the edge of the flange if the cones are stuck.
1. Half shaft flange
2. Half shaft
Remove the half shaft flange.
Remove the half shaft.
Refit the half shaft flange which keeps dirt out.
Half shaft with built in flange
The half shafts must be removed on both the left-hand and right-hand sides.
Apply the parking brake.
Clean the area around the half shaft flange.
00:01-08 Issue: 8 en-GB
© Scania CV AB 94 (103)