Release The Electronic Parking Brake - Scania L Series Product Information

Recovery and shunting

Release the electronic parking brake

Releasing the parking brake by refilling with external air
Connect the compressed air from an external source to the MU connection.
Activate workshop mode for the parking brake.
1. Switch on the voltage with the starter key.
2. Release the parking brake.
3. Press and hold the parking brake release for five seconds and turn off the
power with the starter key.
Apply the parking brake via the hand control unit or drive the vehicle at a
speed of more than 10 km/h to deactivate workshop mode.
00:01-08 Issue: 8 en-GB
© Scania CV AB 84 (103)