Scania L Series Product Information page 91

Recovery and shunting
IMPORTANT!
Danger of cross-threading. Clean and oil the bolt. Do not use a nut runner.
If the bolt is damaged, the parking brake will not release even though the
bolt is unscrewed.
The release bolts 1 are available in different versions. The release bolt is
screwed out different lengths depending on the version. Screw until it stops.
On certain versions there is a red pin 2 in the release bolt centre that indicates
that the bolt is screwed out from its normal position.
00:01-08 Issue: 8 en-GB
© Scania CV AB 88 (103)